NEWS AND EVENTS

The operation of the central air conditioning system requires a large amount of water as the conductive medium. Long-term operation of water in the system and other reasons can cause problems such as corrosion of unit equipment, scaling, growth of microorganisms (bacteria, algae) and slime deposition. These problems will not only increase the energy consumption of the air conditioner, but also affect the air conditioner. The normal and stable operation of the system will shorten the service life of the system. Therefore, necessary cleaning and water quality stabilization treatment must be carried out on the cooling water and chilled water systems to maintain good conduction efficiency, extend the service life of the equipment, and enable the unit to operate in an efficient, safe, and stable state. In particular, central air-conditioning systems that are newly put into operation or that start operating in a new cooling season need to be cleaned and pre-filmed.

Plate heat exchanger is a new type of high-efficiency heat exchanger made of a series of stacked metal sheets with a certain corrugated shape. Thin rectangular channels are formed between various plates, and heat is exchanged through the plates. Plate heat exchanger is an ideal equipment for heat exchange between liquid-liquid and liquid-steam.

The principle of the air separator is the same as its name, which is to separate air and water. What enters the air separator is a mixture of air and water. After entering the air separator, the water automatically sinks to the bottom of the air separator and is passed through the water pipe below. Outflow, the gas is discharged from the upper air pipe. Depending on the purpose of the air separator, the water or gas can be recycled or treated harmlessly.

The cyclone desander integrates cyclone and filtration. It is mainly used to remove solid particles from groundwater, hot water and other water sources. It is suitable for water source heat pump systems. Central air conditioning cooling water, chilled water system. Winter heating and cooling water circulation system, industrial cooling water system. It is widely used in many industrial sectors such as petroleum, chemical industry, environmental protection, medicine, etc., and achieves remarkable effects in the field of water treatment such as sand removal, turbidity reduction, and solid-liquid separation.

Condenser tube cleaning system failures are mainly divided into two categories: mechanical failures and electrical failures. 1) Mechanical FailureMechanical failures mainly include pump failure, pipe rupture, device blockage, etc. Pump failure is usually caused by worn pump bearings, which require

1. First find the nameplate of the surge tank. The nameplate contains the main parameters of the surge tank, such as model, design pressure, capacity and factory time, etc. Determine the model number to find the correct bladder size. If the nameplate on the tank is missing or the font is unclear, yo