NEWS AND EVENTS

The cooling circulating water system is an open system, dust and impurities in the air and scale in the pipes will enter the water and deteriorate the water quality; more impurities will easily clog the copper tubes of the heat exchanger, reduce the heat exchange rate, and affect the effect of the entire cooling system; shallow sand filters can filter impurities in the water, reduce turbidity, reduce the blockage rate of copper tubes, and maintain the normal operation of the cooling system, so cooling circulating water systems need shallow sand filters.

The principle of the semi-volumetric heat exchanger is to increase the flow of the heat medium and hot water outside the tube, increase the flow of the heat medium and hot water, and transform the laminar heat transfer into turbulent heat transfer; while the volumetric heat exchanger completely separates the heat transfer part from the heat storage part, which not only improves the heat transfer effect, but also eliminates the cold stagnant water area when the heat storage part stores all the hot water.

Disinfectants: Chlorine-based compounds such as chlorine gas, sodium hypochlorite (bleach), or chlorine dioxide are commonly dosed into water systems to disinfect and kill pathogens, bacteria, and other harmful microorganisms.pH Adjusting Chemicals: Acids (e.g., sulfuric acid, hydrochloric acid) or

As an important thermal energy supply equipment, boilers can produce qualified hot water and steam and are now widely used in various industries. It is not difficult to find that the inner wall of the boiler will be covered with a thick layer of scale when it is operated for a long time, which will

The filling order of filter materials in multi-media filters is as follows: anthracite with low density and large particles is selected for the upper layer, followed by quartz sand with high density and small particles, and the bottom layer is a large particle support layer. The reasons for the occu

Agricultural irrigation water typically requires a mineralization level of less than 2000 mg/L to ensure that crops are not negatively affected by high concentrations of dissolved salts. High levels of mineralization can lead to soil salinity, which can reduce the availability of water to plants, hi